Battery and inverter compatibility list
Which hybrid and off-grid inverters work with SunoraX LiFePO4 batteries, by brand and model. Pairings marked as approved are on the inverter maker’s battery list; the others have been tested on the model shown or use a supported protocol. Send us your inverter model and we confirm the pairing before you order.
Low-voltage batteries (48 V and 51.2 V)
Applies to the SX-HB16, SX-H-LV51-FS, SX-H-LV51-W, SX-H-LV51-RK, SX-H-LV51-ST and SX-H-LV48 batteries. Most inverters use the Pylon CAN protocol at 500 kbit/s; a few use RS485 Modbus at 9600 baud.
| Inverter brand | Models | Communication | Status |
|---|---|---|---|
| Deye | SUN-5K-SG03LP1-EU SUN-5K-SG04LP1-EU-SM2 SUN-20K-SG05LP3-EU-SM2 |
CAN 500K (Pylon) | On the inverter maker’s approved battery list |
| Solis | S6-EH1P6K-L-PLUS | CAN 500K (Pylon) | On the inverter maker’s approved battery list |
| Luxpower | SNA6000 WPV | CAN 500K (Pylon) | On the inverter maker’s approved battery list |
| Victron Energy | MultiPlus-II 48/6k5/100-50 230V | CAN 500K | Tested model |
| SMA | Sunny Island SI 6.0H | CAN 500K | Tested model |
| Growatt | SPF 6000 ES PLUS | CAN 500K | Tested model |
| Sungrow | MG6RL | CAN 500K (Pylon) | Tested model |
| Hoymiles | HYS-6.0LV-EUG1-WIFI HIT-20L-G3 |
CAN 500K | Tested model |
| Megarevo | R6KL1DA-G2S | CAN 500K (Pylon) | Tested model |
| Voltronic Power | INFINI V4 WP ELITE 6.6K | RS485 Modbus 9600 | Tested model |
| SRNE | HSI 5500 | RS485 Modbus 9600 | Tested model |
| MUST | PV1800 | CAN 100K | Tested model |
| Isuna | 6000S | CAN 500K (Pylon) | Tested model |
| AOHAI | FSA-4K1P-BL A0-6KSL-G2 FSA-12K1P-BL |
CAN 500K (Pylon) | Tested model |
| CVTE | PV1800-12 | CAN 500K (Pylon) | Tested model |
| Top One Power | HMS-48113M160 | CAN 500K (Pylon) | Tested model |
| MOTOMA | SO-SIV-G4MKSC-48V5KVA-P | RS485 Modbus 9600 | Tested model |
| Sofar | — | CAN 500K | Protocol supported, model confirmed per order |
High-voltage batteries and racks
Applies to the SX-H-HV stackable home battery and the SX-HR high-voltage rack for commercial sites.
| Inverter brand | Models | Communication | Status |
|---|---|---|---|
| Deye | SUN-50K-SG01HP3-EU-BM4 | CAN 500K (Pylon) | On the inverter maker’s approved battery list |
| Solis | S6-EH3P10K2-H | CAN 500K (Pylon) | On the inverter maker’s approved battery list |
| Hoymiles | HYT-10.0HV-EUG1 | CAN 500K (Pylon) | Tested model |
| Sofar | HYD 20KTL-3PH | CAN 500K | Tested model |
| Growatt | SPF 6000 ES PLUS | CAN 500K | Tested model |
| GoodWe | — | CAN 500K | Protocol supported, model confirmed per order |
| Afore | — | CAN 500K | Protocol supported, model confirmed per order |
| Megarevo | — | CAN 500K | Protocol supported, model confirmed per order |
Setting up the pairing
- Connect the battery’s CAN or RS485 port to the inverter’s BMS port with the cable supplied.
- Set the battery’s protocol switch as shown in the battery manual for that inverter brand.
- On the inverter, choose lithium battery with the matching protocol (often listed as Pylon or the brand’s own lithium setting).
- Inverter firmware can change the battery menu. If the battery does not appear, send us the inverter model and firmware version.
Approved-list entries are registered by our manufacturing partner for this battery platform; the listing documents come with the quotation.
Questions about compatibility
Does the SX-HB16 work with Deye hybrid inverters?
Yes. The low-voltage platform behind the SX-HB16 is on Deye’s approved battery list for the SUN-5K-SG03LP1-EU, SUN-5K-SG04LP1-EU-SM2 and SUN-20K-SG05LP3-EU-SM2, using the Pylon CAN protocol.
Which inverter works with the SX-HR high-voltage rack?
The high-voltage platform is on the approved battery lists of Deye for the SUN-50K-SG01HP3-EU-BM4 and of Solis for the S6-EH3P10K2-H. Hoymiles HYT-10.0HV-EUG1 and Sofar HYD 20KTL-3PH have also been tested.
Can I use the batteries with Victron or SMA?
Yes. Victron MultiPlus-II 48/6k5/100-50 230V and SMA Sunny Island SI 6.0H have been tested over CAN at 500 kbit/s.
My inverter is not on the list. What now?
Send us the inverter brand, model and firmware version. We check the protocol and confirm the pairing in writing before you order.
Check your inverter model
Tell us the inverter brand, model and firmware your installers use. We reply within one business day with the matching battery and settings.
Compatibility by inverter brand
Model-by-model notes for installers: Deye · Growatt · Luxpower · SMA · Solis · Victron Energy.
Last updated: